Aporte Frp Y Formato En Samsung A34 A346m Con Mdm Con Unlocktool Opciones

[Fulltiempo]

Chimera lo saca, intente con ISP pero la verdad no pude conectar, de ultimas intente con Chimera y salio de una.
solo hay que conectar el equipo encendido, vamos a la seccion de FRP, eliminar bloqueo, seleccionan FRP march 2023. listo es todo sin abrir el equipo son isp.

amigo pero si tiene kg locked no pasa cierto¡???

[Anunciante Autorizado]

[DarkPipa]

Bit 8 alguien a intentado?

Tp con pandora sale en binario 8

[DarkPipa]

Tp con pandora sale en binario 8

CÓDIGO

Selected model: Samsung SM-A346M (Samsung Galaxy A34 5G)
Operation: Erase FRP And Wipe
Software version: 7.5
Erasing of partitions can damage your device.
Make sure that you have a backup created. Continue? YES

Connect Type-C to NONE... OK
Host Power Off... OK
Connect phone to [PC] in BROM/PRELOADER Mode
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM19 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0959
Get sec config... OK [000000E5]
Active sec flags: [SBC DAA]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6877]
LibUSB installed
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Release testpoint, waiting 2 seconds
Advanced Bypass Security... OK
Waiting for device... OK
Driver: [MediaTek Inc.,wdm_usb,MediaTek USB Port,usb2ser.sys,3.0.1512.0]
You are using driver version 3.0.1512.0, we recommend using version 3.0.1504.0 for proper operation. You can install the correct driver from the program directory.
Device found at COM19 [BROM]
Open port... OK
Send start cmd... OK
Get HW code from device... 0959
Get sec config... OK [000000E0]
Active sec flags: []
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6877]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID =  0xE9F63CB2, 0x6F6E0DE9, 0xC5AE1651, 0x4B3CEC4C
Get Chip ID... [MT6877]
Get SOC ID... [1A7976AA32A6CD23726B4E1616DEC9C019D2F03C9183C1B56B650AB44D847871]
Get sec config... OK [000000E0]
Load DownloadAgent... OK
Search DA... OK [17]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
UFS CID (FW VER): KM2L9001CM-B518 (0004)
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
UFS INFO:
   UFS_CID   : KM2L9001CM-B518
   UFS_FWVER : 0004
   BLOCK_SIZE: 0x0000001000 (4,00Kb)
   UFS_LU0   : 0x0000400000 (4,00Mb)
   UFS_LU1   : 0x0000400000 (4,00Mb)
   UFS_LU2   : 0x1DCB000000 (119,17Gb)
RAM INFO:
   INT_SRAM: 0x0000070000 (448,00Kb)
   EXT_RAM : 0x0180000000 (6,00Gb)
HEALTH:
   Pre EOL Info:  normal
   DeviceLifeTimeEstA:  0% - 10% device life time used
   DeviceLifeTimeEstB:  0% - 10% device life time used
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK
Read product info... [EROFS] ... OK
Product Brand        : samsung
Product Manufacturer : samsung
Product Model        : SM-A346M
Product Name         : a34xub
Product Device       : a34x
Product Board        : a34x
Board Platform       : mt6877
Build ID             : SP1A.210812.016
Build Date           : Tue Aug 20 03:28:05 KST 2024
Firmware Version     : A346MUBU8CXH2
Userdata FS Type     : F2FS
Read partition "frp"... OK
Read partition "persistent"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Samsung_SM-A346M%20(Samsung%20Galaxy%20A34%205G)/FRP_BACKUP_(2024-10-23_20-56-29)/
Format FRP... [P1] [P2] OK
Writting FRP data... OK
Formatting "userdata" partition... OK
Formatting "cache" partition... OK
Formatting "metadata" partition... OK
Wipe data done!