Aporte Flash Blu C5 Plus C130eq |
Bienvenido, invitado ( Identificarse | Registrarse )
![]() ![]() |
Aporte Flash Blu C5 Plus C130eq |
![]() ![]()
Publicado:
#1
|
|
![]() Miembro del Clan ![]() Grupo: Miembros Mensajes: 22 Agradecimientos: 28 Registrado: 16-August 17 Desde: cuba Miembro No.: 979,045 Pais: ![]() ![]() |
1.- conectar la nck y abrir el modulo nckdongle_sprd_module (la versión más reciente) probado con la 1.4
2.- elegir el modulo pac firmware flasher 3.- open pac file: elegir el archivo que descomprimen: ![]() 4.-flash phone 5.- conectar bateria, luego presionar "vol+"+ "vol-"+ "power" e inmediatamente conectar cables usb. listo a cobrar EXE: NckDongle Spreadtrum Module 1.4 ACTION: Flash Firmware. Selected firmware: BLU_C130EQ_V8.1.G.04.01_GENERIC_13-11-2019_0923.pac NV: Default Mode (protect calibration) Device Storage: EMMC Detected: SPRD U2S Diag (COM3) [00:00:00] Sending loader. BOOT: SPRD3W Sending loader, keep boot key untill loader start. [00:00:06] Loader ok [00:00:07] Wait for loader.... Loader OK: Spreadtrum Boot Block version 1.1 Changing bautrate OK. [00:00:07] First boot done. [00:00:07] Sending second loader. [00:00:14] Second loader sent ok. New flash protocol detected. [00:00:14] Reading: miscdata [00:00:14] Reading: w_fixnv1 NVRAM saved to: C:\Users\Monchi\Documents\spreadtrum_module\spd_nvram_backup\_359856100209941\_359856100209941_nvram_backup.tar [00:00:27] Start write: w_fixnv1 Protecting GSM_CALI_ITEM_ID id: 0x2 Protecting W_Calibration id: 0x12D Protecting AFC id: 0x9C7 Protecting BlueTooth id: 0x191 Protecting BandSelect id: 0xD Protecting WIFI id: 0x199 Protecting MMITest id: 0x19A Protecting WIFICal1 id: 0x19F Protecting WIFICal2 id: 0x1A0 Protecting WIFICal3 id: 0x1A1 [00:00:33] Start write: prodnv [00:00:36] Format: uboot [00:00:36] [uboot]Format OK. [00:00:36] Format: uboot_log [00:00:36] [uboot_log]Format OK. [00:00:36] Start write: splloader [00:00:36] Start write: vbmeta [00:00:37] Start write: w_modem [00:00:45] Start write: w_deltanv [00:00:45] Start write: w_gdsp [00:00:50] Start write: pm_sys [00:00:50] Start write: gpsgl [00:00:51] Start write: gpsbd [00:00:52] Start write: wcnmodem [00:00:52] Start write: boot [00:01:07] Start write: recovery [00:01:22] Start write: system [00:10:19] Start write: customerdata [00:10:21] Start write: userdata [00:10:35] Start write: logo [00:10:35] Start write: fbootlogo [00:10:36] Start write: cache [00:10:39] Start write: vendor [00:11:44] Format: w_runtimenv1 [00:11:44] [w_runtimenv1]Format OK. [00:11:44] Format: misc [00:11:44] [misc]Format OK. [00:11:44] Start write: trustos [00:11:46] Start write: sml [00:11:46] Start write: uboot [00:11:47] Start write: persist [00:11:48] Start write: fbootlogo3 [00:11:49] Start write: fbootlogo4 [00:11:49] Start write: fbootlogo5 [00:11:50] Start write: UDC_config Flashing done. Wait untill phone restart. Log saved: C:\Users\Monchi\Documents\spreadtrum_module\Saved_Logs\_writepac_.txt Total Time: 00:11:51 Done. Mensaje modificado por LAB_SANTACRUZ el Apr 12 2021, 10:57 AM
Motivo de edición: Esta estrictamente escribir en mayúsculas, así como link externos de descarga suba los archivos directamente al servidor de clangsm y no a un alojamiento externo.
-------------------- ...PARA AGRADECER NO TIENES QUE SER VIP, RECUERDA QUE COMEMOS GRACIAS AL APORTE... |
|
|
A continuacion 1 usuario(s) le Agradece(n) a jygcloud por su Colaboracion: jonascoffe13 |
![]() ![]() |
Ver Visitas | Fecha y Hora actual: 6th September 2024 - 04:38 PM |