Sense Tw102 Frp Opciones

[cold45]

ultimo parche de seguridad modo de conexion apagado presionar ambos botones de volumen y conenctar en umt seleccionar generic qlcomm pestaña format/reset frp reset.



Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM7)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM7)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID : E1601000 [8937] 04001900
OPK_DATA : A7E18521C90DEBF7FCA804FEB98964384CC488EAAF7252A8BD9722438E73A37D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_066]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8917, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Treswave TW102 [TW102]
Brand : SENSE
Prod.Name : TW102
Software : TW102.01.05, 231109 [Wed Nov 15 23:31:59 CST 2023]
Android Ver. : 11
Patch Level : 2023-12-05
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 9.2

[Anunciante Autorizado]

[bet945]

ultimo parche de seguridad modo de conexion apagado presionar ambos botones de volumen y conenctar en umt seleccionar generic qlcomm pestaña format/reset frp reset.
Operation : Reset FRP
Checking for existing devices...Found
Port : Qualcomm HS-USB QDLoader 9008 (COM7)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Opening Port...OK
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
SAMSUNG : Turn Off phone, hold EDL Cable Button and insert to phone and
press VOL DOWN + POWER on phone more than 3 times rapidly and then leave EDL Cable Button.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM7)
Driver Info : Qualcomm Incorporated, qcusbser.sys, 2.1.3.5
Connecting to phone...OK
Waiting for response...Ignored
Init Handshake Sequence...OK
Hardware ID : E1601000 [8937] 04001900
OPK_DATA : A7E18521C90DEBF7FCA804FEB98964384CC488EAAF7252A8BD9722438E73A37D
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8937_066]...Done
Executing Loader...OK
Detecting Storage Type...OK
Hardware : 8917, EMMC, 16 GB
LU Count : 3 [0x01D1F000] [0x00002000] [0x00002000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 262144 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : Treswave TW102 [TW102]
Brand : SENSE
Prod.Name : TW102
Software : TW102.01.05, 231109 [Wed Nov 15 23:31:59 CST 2023]
Android Ver. : 11
Patch Level : 2023-12-05
Resetting FRP Lock......Done
Operation Finished.
QcFire Ver. 9.2

sabes si hay unlock para este modelo? pide codigo al insertar sim

[ivan888]

sabes si hay unlock para este modelo? pide codigo al insertar sim

pudiste conseguir el codigo de desbloqueo?

[SERVI-CEL.FM]

pudiste conseguir el codigo de desbloqueo?

alguien de ustedes pudo conseguir la forma de desloquear de red este equipo.? con codigo , o por cualquier otro metodo.? si fue posile para ustedes pueden compartir su aporte de como y donde consiguieron el codigo. o que metodo usaron.? de ante mano se agradece toda ayuda.