Frp Blu S91 Con Unlocktool Opciones

[luias_8a]

frp blu S91
con unlocktool
selecionar apartado mediatek
luego apartado frp
conectar en modo Broom

ERASE FRP Initializing usb... OK
Waiting for device... COM45 [BOOTROM:0E8D:0003]
Bypassing authentication... OK
Analyzing... preloader_k62v1_64_bsp.bin [MT6765:5:912] [Internal]
Handshaking... OK
Reading hardware info... OK
  Hardware : MT6765 [Helio G25|G35|P35] 0766 8A00 CA00 0000
  Security Config : SCB SLA DAA
  MEID : 2615E843CB7BC8E7A0DA44D0818F684E
Sending Download-Agent... OK
Syncing with target... OK
Booting device... OK
Syncing with DA... OK
  Storage : EMMC - CID : 410301D6.34344133.D10A1032.CFB82499
  Vendor : Samsung - Name : A3A442 - Serial : 614060298 - Rev : 16
  Boot1 : 4 MiB - Boot2 : 4 MiB - RPMB : 16 MiB - User Area : 115.23 GiB
Reading partition info... OK [46]
Reading device info... OK
   Model Name : S91
   Manufacturer : BLU
   Platform : pri_board
   Android Version : 11
   Security Patch : 2022-12-05
   Build ID : K6520SBBL.GB.HD.R0.RBFBFRFZRA.1205_1057.V4.05
   Build : 1670208657
   Build Date : Mon Dec 5 10:46:43 CST 2022
Erasing FRP... OK
UNLOCKTOOL 2023.02.13.0
Elapsed time : 35 seconds

[Anunciante Autorizado]

[Cesarqwerty890]

buenas tardes me podrías ayudar no me muestra el contenido tengo un Blu s91 bloqueado por cuenta de Google que no e podido desbloquear y no encuentro información por ningún lado, bueno gracias y buen día

[HIKARORL]

con hydra en mtk; seleccionas brand auto y de una lo saca

[Yobian]

buenas tardes me podrías ayudar no me muestra el contenido tengo un Blu s91 bloqueado por cuenta de Google que no e podido desbloquear y no encuentro información por ningún lado, bueno gracias y buen día

Con pandora Selected model: Mediatek Mediatek
Open port... OK
Send start cmd... OK
Get HW code from device... 0766
Get sec config... OK [000000E1]
Active sec flags: [SBC]
Get HW & SW version from device... OK
HW VER: CA00, SW VER: 0000, HW SUB CODE: 8A00
Detect chip [MT6765]
Library Version [2]
Select platform... OK
Init BROM... OK
Force Charge... OK
Disable WatchDog Timer... OK
Reopen port for libver2... OK
Get ME ID... OK
ME_ID = 0x86356517, 0xAF2BF3EB, 0x16FFAC5D, 0xF1C8C6B6
Get Chip ID... [MT6765]
Get SOC ID... [110C8401EFA1FD736FAE571F25FC364F3A12915ADA76BD914BA88962D454EEAA]
Get sec config... OK [000000E1]
Load DownloadAgent... OK
Search DA... OK [7]
Send preloader... OK
Start preloader... OK
Checking preloader answer... OK
Send bootloader... OK
Start bootloader... OK
Wait for answer from bootloader... OK
Send SYNC signal... OK
Setup device enviroment... OK
Setup device parametres... OK
Receive DA SYNC signal... OK
Set DA parametres... OK
Get device connection agent... [BROM]
Get device info... OK
EMMC_ID: 0xD60103413341343432101AE6D624B841
Load EMI from phone... OK
Parse EMI config... OK
Init EXT RAM... OK
Send 2nd DA... OK
Get device info... OK
EMMC INFO:
EMMC_CNAME: A3A442
EMMC_ID : 0xD60103413341343432101AE6D624B841
EMMC_BOOT1: 0x0000400000 (4.00Mb)
EMMC_BOOT2: 0x0000400000 (4.00Mb)
EMMC_RPMB : 0x0001000000 (16.00Mb)
EMMC_USER : 0x1CCF000000 (115.23Gb)
RAM INFO:
INT_SRAM: 0x000003A000 (232.00Kb)
EXT_RAM : 0x0100000000 (4.00Gb)
Checking USB status... USB_HIGH_SPEED
Read partitions info from phone... OK
Checking A/B state... OK [B]
Read product info... [EXT4] ... OK
Product Brand : BLU
Product Manufacturer : BLU
Product Model : S91 Pro
Product Name : S91_PRO
Product Device : S0730WW
Product Board : pri_board
Board Platform : mt6765
Build ID : SP1A.210812.016
Build Date : Tue Sep 5 17:32:47 CST 2023
Firmware Version : 1693906367
Userdata FS Type : F2FS
Read partition "frp"... OK
Backup saved to C:/Program%20Files%20(x86)/Z3X/Pandora/Backup/MTK/Mediatek_MT6765/FRP_BACKUP_(2023-11-28_12-0-25)/
Writting FRP data... OK
Erase FRP done!

Selected model: Mediatek Mediatek
Operation: Eliminar FRP
Software version: 6.0
Work ID: 13351035