Samsung A217m Unlock Opciones

[CAD]

Te arroja varios códigos, primero tienes que poner el freeze y después el nck

solo el freezer me ajora lo ingreso al teléfono y me pide el de red pero el softwar de z3x pro no lo aroja, trato la manera de darle leer el código nuevamente y me aroja el mismo y no el nkc y me consumio otros 5 creditos....

Mensaje modificado por CAD el Jun 19 2021, 02:39 PM

[Anunciante Autorizado]

[farkycell]

amigos les comparto sale con chimera en bit 5 full seguridad 1 enero del 2021 consume 109 creditos operacion read codes

[merut]

Les comento que este samsung a21s tenia los intentos en 0 y toco hacerlo 2 veces el primero para que te genere el codigo mck y te descuenta 5 creditos le colocas una sim card te pedira codigo mck lo ingresas el que te genero y luego te pedira el codigo unlock de red quitas la simcard y lo vuelves a pasar te descontra 5 creditos y ahi si te va a generar los 2 codigos el mck y el nck metes el primero q seria el mck y luego el otro y listooooooooo a cobrarrrrrrrr

CODE

UNLOCK INSTRUCTIONS:
Notice about MAR2021 algo!
Please be careful, this method will try to read both codes MCK and NCK. But in some cases
these codes can be read separately only! This is specifically related only to device security.
In this case both codes calculations will take separated credits for processing!

To read security codes using sever:
Knox warranty does not matter.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server [UPLOAD Mar 2021]
Selected model: SM-A217M
Software version: 42.10

Checking Login and Password... could not connect to server
Checking Login and Password... OK
Ballance: 100 crd.
You have 100 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A217M
Android version: 10
PDA version: A217MUBS3ATK2
CSC version: A217MOWA3ATJ1
Phone version: A217MUBU3ATG6
Product code: SM-A217MZKECHL
CSC country code: Chile
CSC sales code: CHL
Carrier ID: CHL
Phone SN: RF8N7306PRZ
IMEI: 355xxxxxxxxxxxx
HW version: MP 0.500
RF cal date: 20200728
Chip name: EXYNOS850
Modem board: SHANNON318
Security patch: 2020-11-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM37 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code (MCK): 81571747
To read NET Lock Code(NCK), please insert SIM Card and enter MCK code, then read the codes again.

Done with Samsung Tool PRO v.42.10

Aqui la segunda donde te da los 2 codigos unlock esto fue hecho hoy 15-04 2021

CODE

UNLOCK INSTRUCTIONS:
Notice about MAR2021 algo!
Please be careful, this method will try to read both codes MCK and NCK. But in some cases
these codes can be read separately only! This is specifically related only to device security.
In this case both codes calculations will take separated credits for processing!

To read security codes using sever:
Knox warranty does not matter.
1. Power on the phone.
2. Tap 7 times on 'Build number' in 'Settings'-'About phone' to enable 'Developer options',
go to 'Settings'-'Developer options' and enable 'USB debugging'.
3. Connect the phone to PC with USB cable, install drivers if needed.
4. Select device in ADB settings.
5. Press 'Read Codes via server' button, write your login and password in window if it will appear.
(Login and password will be saved as default after first input and can be changed in settings.)
Operation: Read Codes via Server [UPLOAD Mar 2021]
Selected model: SM-A217M
Software version: 42.10

Checking Login and Password... could not connect to server
Checking Login and Password... could not connect to server
Checking Login and Password... OK
Ballance: 95 crd.
You have95 credit(s) left. This operation takes 5 credits.Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A217M
Android version: 10
PDA version: A217MUBS3ATK2
CSC version: A217MOWA3ATJ1
Phone version: A217MUBU3ATG6
Product code: SM-A217MZKECHL
CSC country code: Chile
CSC sales code: CHL
Carrier ID: CHL
Phone SN: RF8N7306PRZ
IMEI: 355xxxxxxxxxxxxx
HW version: MP 0.500
RF cal date: 20200728
Chip name: EXYNOS850
Modem board: SHANNON318
Security patch: 2020-11-01
Boot Warranty bit: 0
SIM State: ABSENT
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Executing... OK
Searching Ramdump interface... COM37 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code (MCK): 81571747
Network code (NCK): 96037535

Done with Samsung Tool PRO v.42.10

con que caja lo isiste bro ?

[DJTECO]

Te arroja varios códigos, primero tienes que poner el freeze y después el nck

fijate broh q me paso lo mismo a la primera meti el frezze code..osea mck..luego con otros 5crds supuestamente te da el de red.. y no es asi vuelve a
lanzar el mismo frezze y te quita los 5 crds...como sera para q de el nck code ...no mck frezze

[fredycrack]

fijate broh q me paso lo mismo a la primera meti el frezze code..osea mck..luego con otros 5crds supuestamente te da el de red.. y no es asi vuelve a
lanzar el mismo frezze y te quita los 5 crds...como sera para q de el nck code ...no mck frezze

me pasa lo mismo con chimera en Bin 6

[john004]

amigos les comparto sale con chimera en bit 5 full seguridad 1 enero del 2021 consume 109 creditos operacion read codes

excelente, funcionando hasta el dia de hoy , binario 5 compañia tigo

[victor_1874]

excelente, funcionando hasta el dia de hoy , binario 5 compañia tigo

Hola compañero, chimera saca los dos códigos, el mck y nck? Gracias

[Poliver]

Colegas BIT 5 sale sin problemas en Z3X BOX consume 5 créditos seguridad 1 marzo 2021

[Pachacútec]

Colegas BIT 5 sale sin problemas en Z3X BOX consume 5 créditos seguridad 1 marzo 2021

Probado con z3x en bit 3, solo consume 5 créditos, Parche de seguridad 1 septiembre 2020.
1)Activar Depuración.
2)*#0808#
3) Read Phone Info
4) Read Codes via Server [UPLOAD Mar 2021]

Checking Login and Password... OK
Balance: 30 crd.
You have 30 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK code, using this method will consume credits twice - first for MCK code and then for NCK. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A217M
Android version: 10
PDA version: A217MUBU3ATI1
CSC version: A217MOWO3ATI1
Phone version: A217MUBU3ATI1
Product code: SM-A217MZKEZTO
CSC country code: Brazil
CSC sales code: ZTO
Carrier ID: CHL
Phone SN: R58NA5BQ73J
IMEI: 35695484*******
HW version: MP 0.500
RF cal date: 20201030
Chip name: EXYNOS850
Modem board: SHANNON318
Security patch: 2020-09-01
Boot Warranty bit: 0
SIM State: ABSENT
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Checking SIM status... OK
Executing... OK
Searching Ramdump interface... COM4 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Freeze code (MCK): 29062627
Network code (NCK): 28274941

Done with Samsung Tool PRO v.43.9

Mensaje modificado por Pachacútec el Sep 7 2021, 04:29 PM

[josearcadio]

Operation: Read Codes via Server [UPLOAD Mar 2021]
Selected model: SM-A217M
Software version: 43.9

Checking Login and Password... OK
Balance: 20 crd.
You have 20 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK code, using this method will consume credits twice - first for MCK code and then for NCK. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A217M
Android version: 11
PDA version: A217MUBS6CUF4
CSC version: A217MOWO6CUF9
Phone version: A217MUBS6CUF4
Product code: SM-A217MZKMCGU
CSC country code: Guatemala
CSC sales code: CGU
Carrier ID: CGU
Phone SN: RF8R31L69JP
IMEI:
HW version: MP 0.500
RF cal date: 20210318
Chip name: EXYNOS850
Modem board: SHANNON318
Security patch: 2021-06-01
Boot Warranty bit: 0
SIM State: ABSENT
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Checking SIM status... OK
Executing... OK
Searching Ramdump interface... COM4 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Network code (NCK): 91615258

Done with Samsung Tool PRO v.43.9

[josearcadio]

Operation: Read Codes via Server [UPLOAD Mar 2021]
Selected model: SM-A217M
Software version: 43.9

Checking Login and Password... OK
Balance: 20 crd.
You have 20 credit(s) left. This operation takes 5 credits. Attention! In case if phone asking MCK code, using this method will consume credits twice - first for MCK code and then for NCK. Continue? Yes
Waiting ADB device... OK
Reading phone info...
Model: SM-A217M
Android version: 11
PDA version: A217MUBS6CUF4
CSC version: A217MOWO6CUF9
Phone version: A217MUBS6CUF4
Product code: SM-A217MZKMCGU
CSC country code: Guatemala
CSC sales code: CGU
Carrier ID: CGU
Phone SN: RF8R31L69JP
IMEI:
HW version: MP 0.500
RF cal date: 20210318
Chip name: EXYNOS850
Modem board: SHANNON318
Security patch: 2021-06-01
Boot Warranty bit: 0
SIM State: ABSENT
Initialization zTool Loader... OK
Running zTool, please wait... OK
Loading... OK
Initialization zTool... OK
Running zTool, please wait... OK
Reading lock state... OK
Checking SIM status... OK
Executing... OK
Searching Ramdump interface... COM4 detected
Rebooting phone... OK
Waiting ADB device... OK
Waiting for device to become ready... OK
Reading ramdump data from phone... OK
Calculating... OK
Searching server... OK
Waiting for server answer... OK
Network code (NCK): 91615258

Done with Samsung Tool PRO v.43.9

SALE AL 100 CON Z3X ULTIMA VERSION

[magnocell]

amigos les comparto sale con chimera en bit 5 full seguridad 1 enero del 2021 consume 109 creditos operacion read codes

tendras el log. eh tradado muchas veces y ne dice fail .solo para ver la compilacion .! te agradeceria

[antoninofs1]

SALE AL 100 CON Z3X ULTIMA VERSION

Android 11 bit 7 alguien que de fe?

[CAD]

Android 11 bit 7 alguien que de fe?

yo intente con samkey y z3x hasta con chimera pero en los dos primeros me dice que tengo que degradar...

[CAD]

Android 11 bit 7 alguien que de fe?

yo intente con samkey y z3x hasta con chimera pero en los dos primeros me dice que tengo que degradar...

[dubonarturo3]

yo intente con samkey y z3x hasta con chimera pero en los dos primeros me dice que tengo que degradar...

este modelo se puede haciendole root con este software _SM-A217M_UNE_A217MUBS7CUH2_fac

[dubonarturo3]

aqui esta todo el proceso del root y luego unlock directo con z3x

Fichero(s) Adjunto(s)

 root_a21... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 51bytes ) Número de descargas: 36

 

[kreator88]

me pasa lo mismo con chimera en Bin 6

Pudiste solucionar? me pasa lo mismo

[Jeyfer]

Buena noche compañeros tengo uno con binario 6 estoy intentando con chimera me da el MCK y me dice que lo inserte con una sim de otra compania, despues que lo retire y vuela a intentar ya lo hice en varias ocaciones pero no me da el codigo nck alguien le ha pasado lo mismo ?

[DJTECO]

Buena noche compañeros tengo uno con binario 6 estoy intentando con chimera me da el MCK y me dice que lo inserte con una sim de otra compania, despues que lo retire y vuela a intentar ya lo hice en varias ocaciones pero no me da el codigo nck alguien le ha pasado lo mismo ?

tienes q hacer la operacion de nuevo..en algunos casos solo te quita los mismo creditos q te quito al inicio y otras veces te vuelve a quitar e nuevo