Zte Blade A3 Seguridad 2020 F4 Opciones

[jorgea1997]

Operation : Repair IMEI
Searching for Device in FTM Mode...Found
Port : ZTE Handset Diagnostic Interface (COM63)
Hardware ID : usb\vid_19d2&pid_0500&rev_0318&mi_00
Compile :

Release : 6 202000: 22:39Aug
Hw. Ver. : 12 2018
Software : CLA_PE_P809F40V1.0.0B25
IMEI : 8699
Reading QCN Data...Done
Saved As : C:\UMTool\QcFire\QCN_Backup\ 12 2018_CLA_PE_P809F40V1.0.0B25_869930030092645_200304_191806.qcn
Switching to EDL Mode...Done
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM64)
Driver Info : ZTE Corporation, zghsser.sys, 5.2104.1.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1009600 [8909] 00000400
OPK_DATA : A4F889863F66ABF67892BE4BFC68025AF5E25CB69AE2BAA25DFF4BCA141C5EBA
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8909_046]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 8 GB
LU Count : 1 [0x00E90000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : ZTE BLADE A3 [P809F40]
Software : CLA_PE_A3_V1.0, 20200106.001241 [Mon Jan 6 00:12:41 CST 2020]
Android Ver. : 8.1.0
Patch Level : 2020-01-01
Saving EFS Backup.......OK
EFS Backup : EFS_ZTE_BLADE A3_CLA_PE_A3_V1.0_2020-01-01_200304_191931.ueb
Reset EFS (Full)......Done
Processing background tasks...Done
Restoring QCN Data...Done
Finalizing process...Done
Operation Finished.
QcFire Ver. 5.1

Mensaje modificado por jorgea1997 el Mar 4 2020, 09:00 PM

Fichero(s) Adjunto(s)

 Screensh... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 224.31k ) Número de descargas: 0
 Screensh... Usted aun no cumple los requisitos para descargar archivos. CLICK para mas INFO ( 464.47k ) Número de descargas: 0

 

[Anunciante Autorizado]

[Marthianfred]

Operation : Repair IMEI
Searching for Device in FTM Mode...Found
Port : ZTE Handset Diagnostic Interface (COM63)
Hardware ID : usb\vid_19d2&pid_0500&rev_0318&mi_00
Compile :

Release : 6 202000: 22:39Aug
Hw. Ver. : 12 2018
Software : CLA_PE_P809F40V1.0.0B25
IMEI : 8699
Reading QCN Data...Done
Saved As : C:\UMTool\QcFire\QCN_Backup\ 12 2018_CLA_PE_P809F40V1.0.0B25_869930030092645_200304_191806.qcn
Switching to EDL Mode...Done
Checking for existing devices...Not Found
Turn Off phone, hold Vol UP + Vol DOWN and insert USB cable.
Some phones may need Special Boot Cable or TestPoint for EDL mode.
Found Port : Qualcomm HS-USB QDLoader 9008 (COM64)
Driver Info : ZTE Corporation, zghsser.sys, 5.2104.1.2
Connecting to phone...OK
Waiting for response...OK
Init Handshake Sequence...OK
Hardware ID : E1009600 [8909] 00000400
OPK_DATA : A4F889863F66ABF67892BE4BFC68025AF5E25CB69AE2BAA25DFF4BCA141C5EBA
Initializing Protocol...OK
Using Auto Loader Selection [1]
Preparing Loader...Done
Sending Loader [8909_046]...Done
Executing Loader...OK
Detecting Chip Type...OK
Hardware : 8909, eMMC, 8 GB
LU Count : 1 [0x00E90000]
WARNING! High Speed Driver is not installed.
Please install driver from QcFire\Drivers folder using Device Manager.
Payload Info : In: 65536 [4096], Out: 1048576, Sector Size: 512
Reading Partition Table...OK
Reading Device Information...OK
Device : ZTE BLADE A3 [P809F40]
Software : CLA_PE_A3_V1.0, 20200106.001241 [Mon Jan 6 00:12:41 CST 2020]
Android Ver. : 8.1.0
Patch Level : 2020-01-01
Saving EFS Backup.......OK
EFS Backup : EFS_ZTE_BLADE A3_CLA_PE_A3_V1.0_2020-01-01_200304_191931.ueb
Reset EFS (Full)......Done
Processing background tasks...Done
Restoring QCN Data...Done
Finalizing process...Done
Operation Finished.
QcFire Ver. 5.1

Hasta donde se... el ZTE Blade A3 2020. es procesador SPD